Nurettin Alp

Ay: Mayıs 2009

  • linuxta bios bilgisi

    dmidecode komutuyla ulaşılabiliyor.

  • Apache’de Python, Perl ve Ruby i çalıştırmak

    libapache2-mod-python, libapache2-mod-perl ve libapache2-mod-ruby paketlerinin kurulup apacheniin yeniden başlatılması lazım.

  • Evolution Programı ile IMAP Kullanımı

    E-postaları delete tuşu ile sildik diyelim. Fakat e-postalar silinmez. Ayrıca Folder menüsünden Expunge yi kullanmak ya da CTRL+E tuş kombinasyonunu kullanmamız lazım.

  • Linux Kurulum

    ama öncelikle sudo apt-get install dselect
    dpkg –get-selections > installed-software
    dpkg –set-selections < installed-software dselect not: get ve setten onceki tir iki tane yanyana küçük tire.

  • Medion Akoya Linux Wireless Kurulumu

    http://www.csnotes.net/blog/home/how-to-install-the-ralink-wireless-driver-for-medion-akoya-using-ubuntu/

    How to install the Ralink wireless driver for Medion akoya using Ubuntu
    February 23rd, 2009 | Posted in Home, Linux

    This article explains how to install rt2860 driver.

    1. First of all, you need to download the driver RT2860PCI/mPCI/PCIe/CB(RT2760/RT2790/RT2860/RT2890) RT2860WebUI from the link here

    2. Second, you need to untar the file which you have downloaded. Type the following in the terminal:

    tar -xvjf 2008_0918_RT2860_Linux_STA_v1.8.0.0.tar.bz2

    3. Then edit the config.mk file:

    sudo gedit 2008_0918_RT2860_Linux_STA_v1.8.0.0/os/linux/config.mk

    and in the following lines replace n with y, so make sure there are two y, because by default there are both n letters:

    # Support Wpa_Supplicant
    HAS_WPA_SUPPLICANT=y
    # Support Native WpaSupplicant for Network Manager
    HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y

    4. Now you have to enter the directory of the driver, compile and install it. Type or better copy-paste the following in the terminal:

    cd 2008_0918_RT2860_Linux_STA_v1.8.0.0/

    sudo su

    make && make install

    modprobe rt2860sta

    exit

    5.Now type

    lsmod | grep rt2860sta

    and it should show something like this:

    rt2860sta 525400 1.

    6. Again type iwconfig to check if r0 is working. If it does, follow the last step to make sure the module is loaded when you reboot, type:

    sudo echo rt2860sta >> /etc/modules

    7. Now you can go to Network Configuration, which is in System ->Preferences and set up a network. Or alternatively, you should see 4 blue lines on the upper panel. By pressing them you should see the available networks.

    Dikkat!!!

    On Ubuntu 8.04 (i386) fresh install, it was necessary to first install build-essential

    apt-get install build-essential

    When I plug in the wire, ubuntu switches to my wired network. Works like a dream.

    I also tested it on Ubuntu 8.10 (amd64). Same procedure works.