Nurettin Alp

Gün: 16 Eylül 2016

  • openhab

    https://github.com/openhab/openhab/wiki/Linux-and-OS-X#apt-get
    Content

    Installation via apt-get
    Manual installation (alternatively – including openHAB Designer)
    Yocto Layer
    Via Chef

    Note: for Hardware specific details for Synology Diskstation, QNAP, and ARM boards like Raspberry Pi visit:

    ARM based systems
    Synology and QNAP servers

    Overview

    openHAB is a Java application and is expected to run on all platforms where JVM 1.6 or later is available. This includes Windows, Mac OS X, and Linux on x86, x86_64, and ARM architectures. openHAB can be run on laptops, desktop computers, or ARM based single-board computers.
    apt-get

    Note: As of the release of openHAB 1.7.1 on 26. Juli 2015 the deb-repository is digitally signed! Therefore you will have to add the “openHAB Bintray Repositories” gpg key to your apt keyring if you want to use the repo. This is also necessary for the installation of releases prior to 1.7.1.. The key installation is described below.

    Installation

    Install Java if 1.6 or higher is not already installed. The following will display your current Java version.

    java -version

    Add the openHAB Bintray Repositories key to the apt-keyring

    using wget:

    wget -qO – ‘https://bintray.com/user/downloadSubjectPublicKey?username=openhab’ | sudo apt-key add –

    or using curl:

    curl ‘https://bintray.com/user/downloadSubjectPublicKey?username=openhab’ | sudo apt-key add –

    Add openHAB apt repository to the apt sources list (Note: the current openhab.list file will be overwritten)

    echo “deb http://dl.bintray.com/openhab/apt-repo stable main” | sudo tee /etc/apt/sources.list.d/openhab.list

    Resynchronize the package index

    sudo apt-get update

    Install the openHAB runtime

    sudo apt-get install openhab-runtime

    If you have more than one OpenHAB binding with a USB device (Z-Wave, RFXCOM, etc), refer to symlinks

    Start openHAB – manually
    Init based on sysVinit (e.g. Debian 7 / Ubuntu 14.x and earlier)

    sudo /etc/init.d/openhab start
    sudo /etc/init.d/openhab status

    Init based on systemd (e.g. Debian 8 / Ubuntu 15.x and higher)

    sudo systemctl start openhab

    Start openHAB – at system startup
    Init based on sysVinit (e.g. Debian 7 / Ubuntu 14.x and earlier)

    sudo update-rc.d openhab defaults

    or using Init based on systemd (e.g. Debian 8 / Ubuntu 15.x and higher)

    sudo systemctl daemon-reload
    sudo systemctl enable openhab

    Install the add-ons / bindings as you need them (see list on right side-bar)

    sudo apt-get install openhab-addon-${addon-type}-${addon-name}

    Examples:

    sudo apt-get install openhab-addon-binding-knx
    sudo apt-get install openhab-addon-persistence-rrd4j
    sudo apt-get install openhab-addon-io-dropbox
    sudo apt-get install openhab-addon-action-twitter

    A list of all available packages can be retrieved with

    sudo apt-cache search openhab

    Configure your system as outlined here: configuration.

    If you wish to use a USB zwave stick or other USB/serial device you will need to add the “openhab” users to the “dialout” group:

    sudo usermod -a -G dialout openhab

    and then reboot.

    Test it

    Point your browser to http://localhost:8080/openhab.app?sitemap=yourname and you should see your sitemap.
    Performance Tuning

    Once your system is stable and configured the way you want it, review Performance Tuning
    To Upgrade

    Note: changed configuration files will be retained even on upgrades.

    sudo apt-get update
    sudo apt-get upgrade

    File locations

    service configuration /etc/default/openhab
    site configuration /etc/openhab
    log files /var/log/openhab
    userdata like rrd4j databases /var/lib/openhab
    openHAB engine, addons and /webapps folder /usr/share/openhab

    Advanced Setup
    Apt Repository Distributions

    stable

    The latest stable openHAB release will be installed.

    testing

    The latest release candidate of openHAB will be installed.

    unstable (not yet available)

    The latest snapshot release of openHAB will be installed.

    version based distribution names (1.7.0, …)

    All Releases are available as with a distribution name corresponding to the version name. If you want to stick your installation to a specific version use one of these distribution names. The installation will only be upgraded if you change the sources.list to another version. Therefore “apt-get update && apt-get upgrade” can be safely used for the other linux software.

    Examples:

    echo “deb https://dl.bintray.com/openhab/apt-repo 1.7.0 main” | sudo tee -a /etc/apt/sources.list
    echo “deb https://dl.bintray.com/openhab/apt-repo 1.7.0.RC1 main” | sudo tee -a /etc/apt/sources.list

    Snapshot builds

    Not yet available.
    Java 8 Installation for Ubuntu or Debian

    su –
    echo “deb http://ppa.launchpad.net/webupd8team/java/ubuntu trusty main” | tee /etc/apt/sources.list.d/webupd8team-java.list
    echo “deb-src http://ppa.launchpad.net/webupd8team/java/ubuntu trusty main” | tee -a /etc/apt/sources.list.d/webupd8team-java.list
    apt-key adv –keyserver hkp://keyserver.ubuntu.com:80 –recv-keys EEA14886
    apt-get update
    apt-get purge openjdk* # (to remove previously installed lower versions)
    apt-get install oracle-java8-installer
    exit

    Manual installation (alternative approach)

    WARNING: this quick setup is an example for a KNX environment. You need different addons and configurations for other bindings.
    Installing the openHAB runtime

    The openHAB runtime comes as a platform-independent zip file. To install it, follow these simple steps:

    You will need to install Java if not already installed. Go to http://java.com/ to get it. For ARM based systems and Synology Diskstation, see Hardware FAQ for instructions on getting Java.
    Unzip the openhab-runtime-.zip to where it is intended to be running from, e.g. /opt/openhab.
    Copy the bindings you have downloaded -knx-binding-.jar and http-binding-.jar- to the “addons” directory.
    Create a personal configuration file configurations/openhab.cfg and add the appropriate configuration parameters from configurations/openhab_default.cfg (depending on the bindings you’ve copied).

    OPTIONAL: Installing the openHAB designer

    The openHAB designer comes as a platform-dependent zip, so choose the right type for your platform. To install it, follow these simple steps:

    Unzip the openhab-designer-–.zip to some directory, e.g. /opt/openhab-designer
    Launch it by the executable openHAB-Designer
    Select the “configurations” folder of your runtime installation in the folder dialog that is shown when selecting the “open folder” toolbar icon.

    Configuring the server

    For please visit the configuration page(s).
    Start the server!

    Launch the runtime by executing the script start.sh

    Go test it!

    openHAB comes with a built-in user interface. It works on all webkit-based browsers like Chrome, Safari, etc. Point your browser to http://localhost:8080/openhab.app?sitemap=yourname and you should be looking at your sitemap.
    Yocto Layer

    For people who make their own linux distribution using Yocto, there is a openHAB layer available:

    https://github.com/ulfwin/meta-openhab

    You can also find it through the very convenient layer search site:

    http://layers.openembedded.org/layerindex/branch/master/layers/

    The layer contains one recipe that install both the runtime engine and addons. Check the README for specific instructions for the layer. How to add and use a layer is not covered here (you need to know that in order use Yocto in the first place), but some explanation can be found here:

    http://www.yoctoproject.org/docs/1.6/dev-manual/dev-manual.html#understanding-and-creating-layers
    Via Chef

    There is a chef cookbook available at github.com/JustinAiken/openhab-cookbook. It can install from the Debian packages or via source.