http://lirc.sourceforge.net/remotes/technisat/100TS035
sudo apt-get install lirc
daha sonra aşağıda yazanları bir dosya oluştur kaydet. ve /usr/share/lirc/remotes/technisat/ içine at.
#
# this config file was automatically generated
# using lirc-0.6.6(any) on Wed May 19 00:28:01 2004
#
# contributed by Nicolas Huillard
#
# brand: TechniSat
# model no. of remote control: 100TS035
# devices being controlled by this remote: SkyStar 2 TV (DVB PCI card)
#
begin remote
name 100TS035
bits 13
flags RC5|CONST_LENGTH
eps 30
aeps 100
one 907 885
zero 907 885
plead 954
gap 113935
toggle_bit 2
begin codes
MUTE 0x000000000000128D
EXT 0x00000000000012B8
A/B 0x00000000000012A3
POWER 0x000000000000128C
TV/RADIO 0x0000000000000293
-/– 0x000000000000128A
1 0x0000000000001281
2 0x0000000000001282
3 0x0000000000001283
4 0x0000000000001284
5 0x0000000000001285
6 0x0000000000001286
7 0x0000000000001287
8 0x0000000000001288
9 0x0000000000001289
0 0x0000000000001280
INFO 0x0000000000000A8F
MENU 0x0000000000000292
EPG 0x00000000000012AF
BACK 0x00000000000012A2
OK 0x0000000000000297
UP 0x00000000000012A0
DOWN 0x00000000000012A1
RIGHT 0x0000000000001290
LEFT 0x0000000000001291
RED 0x00000000000002AB
GREEN 0x00000000000002AC
YELLOW 0x00000000000002AD
BLUE 0x00000000000002AE
CHECK 0x0000000000000AB6
TXT 0x00000000000012BC
STOP 0x00000000000012A9
STOP2 0x0000000000001AA9
HILFE 0x000000000000128F
end codes
end remote
bu işlem bittikten sonra
sudo gedit /etc/lirc/lircd.conf dosyasına
include /usr/share/lirc/remotes/technisat/100TS035 yazısını yaz. sonra kaydet.
sonra
sudo /etc/init.d/lirc restart yap.
sonra
irw yaz.ve test et.